ENERGY MULTIPLIER

We all know about the inexhaustible energy produced by gravity. Through the years a lot of people have tried and are still trying to make use of it, especially nowadays that the energy problems are so serious.

As far as I know, a lot of inventions have been made regarding this resource but none has been exploitable.

After 28 years of hard work, many disappointments, personal expenses and the valuable help of my son in the last couple of years, I have recently ended up with the conclusion of something unbelievably simple. So simple that many people could build it on their own.

Just by making use of common known natural phenomena such as the earth’s attraction (gravitational force), centrifugal power, the lever, the flywheel etc

It is about a mechanism that multiplies any kind of kinetic energy by 800% to 1100% and functions with speed regulation as a common motor.

The referred data are based on an already existing prototype that has been constructed with simple materials.

It could also be auto supplied (run on its own power) with the appropriate technical means which unfortunately I do not have. It is absolutely friendly to the environment, its functionality and performance are not affected by weather conditions and it has a low cost of construction.

For greater needs, more than one mechanism can be connected by freewheels and work independently transmitting their power to a single drive shaft.

Before the presentation of the video and the designs that are attached regarding its construction, I must conclude by saying that if people lived in harmony with nature and paid more attention to its laws and the way it works without “abusing” it, a lot of our problems would have been solved.

This innovation is donated to humanity and I’m hoping for your help to make it known and useful to all.

Yours Sincerely

F.M.Chalkalis.

GENERAL CONSTRUCTION DESCRIPTION

Two metal blades 1.12m long are connected on an axis in an angle of 60° forming an equilateral triangle.

On each metal blade at a 510mm distance from the axis, there is the center of an aerodynamic shape lead disk.           (2 equal disks of 45,69kg total weight.)

The rest 610mm of the metal blade, calculating from the center of each disk, work as a lever.

The metal blades at the length of 1,12m are connected with each other by a tube filled with lead, weighing 4,5kg which increases the total power and which is also part of the halting system.

Following the principles of free fall and centrifugal force the disks cover the 92% of a full rotation.

For instance in order to complete a full rotation from point “zero” (12 o’clock) of a 50kg weight thanks to the lever only 5kg of force is needed.

The transmission of motion to the rotating weight is achieved with 2 wheels similar to the baseball throwing mechanism.

The wheels weigh 15kg which corresponds to the 30% of the rotating weight and they function as flywheels.

FUNCTIONING DESCRIPTION

At the prototype we use electric energy from a 24v battery to power on the motors (wheels) and then the initial motion is given by hand.

Between the battery and the motors is placed a speed regulator.

1)Example with a consumption of 17Α x 24v = 408 w with 160 RPM we have at our drive shaft 4,657Kw which equals to 11,42 times more.

2)Using other set of motors with consumption 45Α x 24v = 1,08Κw with 300 RPM we have 8,73Kw which equal to 8 times more.

The difference comes from the motor’s coefficient of performance (COP).

Calculation method:

Central weight F 45,69Kg = 448,2Ν ∙ r 0,51m = 228.58Nm ∙ 160 RPM ÷ 9550 = 3,829Κw

Additional weight F 4,5Kg = 44,145Ν ∙ r 1,12m = 49.44Nm ∙ 160 RPM ÷ 9550 = 0,828Κw
                                                                                                                       Tot. 4,657Κw 

In a space of 60m² we can place 60 units connected all together with a total output of 6706Kw/24h on the common drive shaft.

•   Mixed performance                            6706,00 Kw /24h 
•   Consumption                                         587,52 Kw /24h
•   Final power on the drive shaft           6118,48 Kw /24h

                                                

                     

COMMENTS

All the pre-mentioned data are according to the existing prototype and can be augmented

1) With specialized materials

2) By increasing the parameters Weight, arm length, lever length and rotations per minute.

3) By placing the mechanism underground where the air resistance is less and furthermore it is safer as accidents are avoided.

4) The base and the elastics used to absorb vibrations must be reinforced as they are under a lot of pressure.

E.g.: At 300 RPM x 50 kg = 15000 kg /min which means 900 tons per hour.

These results are indicative of the space I am working at and they increase if the RPM increase.

•      to download the schemes right click and save as...